Banner
Members

Home
Chaplain
Contact Us
Events
For Sale
History
Heaven I
Heaven I Reporting
Heaven I Scrolling
Maps
Membership
Other Links
Photos
Safety
International

Spring Safety Message 2016

JUN 2016: "Tires"

Last Month I mentioned how important it is to check and maintain the proper air pressure in your motorcycle tires, now I would like to expand on that. These are some great motorcycle tire safety tips from the National Highway Traffic Safety Administration (NHTSA).

Know Your Pressure Level and Load Limits
• Become familiar with your motorcycle manufacturer's inflation guidelines. Look in your motorcycle owner's manual to find the right
PSI (pounds per square inch) of air pressure for your tires. Some bike manufacturers also list this formation on the bike itself. Common locations include the swing arm, front fork tubes, inside the trunk,
and under the seat.
• Keep in mind that these recommendations are usually dependent upon the weight of you and your passenger, as well as any cargo. For instance, some manufacturers advise adding 3 or 4 PSI when carrying
a heavy load. Know your vehicle weight and load, and follow the PSI recommendations specific to your motorcycle. Failure to do so can result in adverse motorcycle handling (wobble and weave) or tire failure, or both.
• Check your tire pressure often and adjust as necessary, using an accurate tire gauge. Motorcycle tire manufacturers recommend checking pressure at least once a week. However, many motorcycle safety experts recommend checking tire pressure and tread wear every time you take your bike out. After all, you ask more of your motorcycle tires than you do your car tires. So it's wise to ensure they're roadworthy each time you ride.

Tire Wear and Care, and When to Buy Replacements
• Take the time to frequently inspect your tires for sidewall and tread groove cracking, punctures, blisters, knots, cuts, excessive or irregular wear. As with tire pressure, it only takes a few minutes every time you ride is not too often. If you do find any of these tread wear conditions, immediately replace the damaged tire. In addition, most tire safety experts recommend replacing rather than attempting to permanently patch a tire.
• When your tread is worn down to the level of the built-in tread wear bars on your tires, the tread won't provide good traction. This is yet another indication it's time for new tires.
• Check your tires for signs of aging, including dry rot and cracking. Even barely used tires become hard with time or exposure to the sun. When tire rubber gets hard and stiff, it tends to crack and cannot grip the road to provide proper traction. So it's wise to replace old or dried-out tires even if they still have plenty of tread on them.
• If you store your motorcycle during winter months, be sure to store it in a cool, dry place, out of direct sunlight and away from ozone-producing appliances (anything with an electric motor, such as a refrigerator). Additionally, your tires should not come into sustained contact with gasoline or oil. Improper storage will rapidly accelerate the normal aging process, making your tires unsafe.

Tire Safety on the Road
• Avoid riding on the shoulder or near medians where sharp objects and other tire-damaging debris
tend to accumulate.
• Constantly monitor the way your motorcycle rides so you can detect any rapid air loss — and respond appropriately without delay. Carry a cell phone whenever you ride, in case of emergencies.

Until next time be Safe/ Ride with Pride…

Last Updated: JUN 2016
Send questions or comments about this website to Blue Knights® GLRC Webmaster
Please read our Disclaimer
Copyright© 1998- Blue Knights® GLRC - All Rights Reserved